Tilta ES-T15 - Plataforma com Placas Frontais e Superiores Placa V-Mount para Sony FS7/FS7 II

Accessorizing your FS7 and FS7 II camera with the Tilta ES-T15 Camera Rig with Front & Top Plate, Quick Release Baseplate, and V-Mount Battery Plate for Sony FS7/FS7 II provides you an all-in-one solution for quick tripod or shoulder mounting your camera, support rods, accessory mounting holes and a V-mount battery plate. The included VCT-style baseplate mounts to your tripod-mounted VCT quick-release mechanism and incorporates a shoulder pad for quick transitions from tripod mounted to handheld. The baseplate features front and rear mounted 15mm rod clamps that follow the LWS specification, and 60mm on-center spacing so it is compatible with optional LWS accessories such as a follow focus and matte box. The front and top plate provide 1/4-20 threaded mounting holes for mounting accessories without stressing your camera body. The top plate accommodates the cameras top handle, and the front plate features a built-in lens adapter support to help relieve stress from your cameras lens port. The V-mount battery plate allows you to use professional-type batteries to power the camera for extended times as well as power a variety of accessories from one battery. ES-T15 Camera Rig with Front Plate and Quick Release Baseplate for Sony FS7/FS7 II lazyLoad.jsOnReady(//ensighten.bhphoto.com/bhfoto/Bootstrap.js); Specifically designed to work with your FS7 or FS7 II camera, the Tilta ES-T15 Camera Rig with Front Plate and Quick Release Baseplate for Sony FS7/FS7 II provides you a protective cage-like front and top enclosure with a VCT type quick release tripod adapter. The front plate and top plate provide 24 additional 1/4-20 accessory mounting points, so you can mount accessories without stressing your cameras body. It integrates a lens adapter support that can help prevent optional lens mount adapters from stressing your cameras E-mount. The top plate is designed to fit around your cameras top handle. The baseplate allows you to go from tripod-mounted to handheld with just the flick of the release lever on an optional VCT adapter plate. The baseplate features a built-in shoulder pad, so the camera retains its handheld functionality and adds LWS rod support for accessories. ARRI-compatible rosettes are built into each side of the baseplate, allowing you to use optional ARRI-compatible handgrips. Front and rear-mounted LWS rod clamps allow you to use the included support rods for optional rod mounted accessories such as a matte box or a follow focus. You can mount the rods in the rear clamps to support optional batteries, off-board recorders, or counterweights. Note only one pair of rods are included, so to use front and rear-mounted accessories you will need to source optional rods. The rig provides a cage-like protection, and once mounted allows you to add accessories with minimal stress to your cameras body. The added functionality minimally impacts the characteristics of the camera and allows you access to all camera functions. You can build this rig and your camera into a handheld rig, and then quickly go from handheld to tripod mounted, on a tripod with a VCT type adapter, without altering your rig configuration. The 15mm rods are female threaded at both ends, allowing you to use optional rod extenders and rods to create longer support rods. One end of each rod is chamfered, which makes it easier to slide rod mounted accessories onto the support rods from the chamfered end. V-Mount Battery Plate for Sony FS7 Designed specifically to integrate into your FS7 camera, the Tilta V-Mount Battery Plate for Sony FS7 provides you a way to power your camera and on-board accessories from a single V-mount battery. The battery plate solidly attaches to your FS7 allowing you to mount optional large capacity V-mount batteries on the back of the camera without significantly altering the balance. Built-in power ports support P-Tap as well as common DC voltage outputs. Using this battery plate with optional V-mount batteries allows you to power on-board accessories using only one battery, instead of using many smaller DV style batteries to power the camera and additional accessories. This single battery powering solution preserves the handheld capabilities of your camera, as opposed to the effect of weight and balance shifts caused by multiple batteries when you operate your camera with accessories. The plate passes through your batteries power through the D-Tap, and provides separate regulated 8 VDC and two 12 VDC outputs. Four cables are included, so you can connect a device to each power output. Provides secure battery attachment for optional V-mount batteries without significantly altering the cameras footprint. Integrated on / off switch allows you to power down to conserve battery without removing the battery. Battery plate provides pass through battery power to a D-Tap output, regulated 8 VDC, and two 12 VDC power outputs for powering an optional camera and accessories.