BB&S Lighting - Controle DMX 4-Way Controller para Pipeline Raw (4 vias)

What You Need to Know When Working with DMX Keep a rein on your Pipeline system with the 4-Way Controller from BBS Lighting. Featuring both manual and DMX modes, this control box enables you to run your setup of up to four 1, 2, 3, or 4 remote phosphor LED Raw Pipes via its on-board control panel or from your console. The controller switches to DMX mode automatically as soon as it detects an incoming DMX signal. At the most basic level the unit gives you control over the output intensity of the connected pipes individually or all as one, either manually or via DMX, and with your choice of standard- or high-resolution dimming. If you have an equal mix of 3200 and 5600K pipes in your setup, you are also able to modulate the overall color temperature of the pipes output from 3200 to 5600K, in either standard- or high-resolution control mode. Color temperature remains steady as you adjust output intensity. Using two extra DMX channels youre able to add strobe to your control parameters, with command over speed and length of the effect. The controller is powered via the included 48V power supply. Slow/fast response for smooth fading or snap-switching between intensity levels Linear or square dimmer curves LED display and 4-button control panel Powered by included 48V supply with AC locking cord