Virtual Reality Headsets

Nullam dignissim elit ut urna rutrum, a fermentum mi auctor. Mauris efficitur magna orci, et dignissim lacus scelerisque sit amet. Proin malesuada tincidunt nisl ac commodo. Vivamus eleifend porttitor ex sit amet suscipit. Vestibulum at ullamcorper lacus, vel facilisis arcu. Aliquam erat volutpat.

Maecenas in sodales nisl. Pellentesque ac nibh mi. Ut lobortis odio nulla, congue rhoncus risus facilisis eget. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. read more

Loja

R$17,99

 9.Solutions Ação Camera L-Bracket

0 de 5
(0)
SKU: 9.XA1017

DESTAQUES DO PRODUTO:

  • Muda o ângulo da câmera em 90°
  • 2,54cm parafuso de montagem
  • Seis buracos de 2,54cm
  • Receiver de montagem rápida
ComprarComparar
R$29,99

 9.Solutions Cisne de cabeça de montagem rápida

0 de 5
(0)
SKU: 9.XG1029

DESTAQUES DO PRODUTO:

  • Aderência magnética, braço flexível
  • Comprimento: 248,92cm
  • Alinhamento de linha instantânea
  • Manga de silicone à prova de intempéries
  • Conectores de montagem rápida macho e fêmea
ComprarComparar
R$112,00 R$160,00

10″ lightweight dovetail plate

0 de 5
(0)
SKU: TT-C16
ikans TT-C16 is a 10″ lightweight dovetail plate that mounts to your tripod and is made from aluminum alloy and stainless steel. This dovetail plate is compatible with our other Tilta 15mm baseplates such as the BlackMagic Cinema Camera Rig (ES-T07), Canon C300/C500 Rig (ES-T06), or the Sony FS700 Rig (ES-T05).
ComprarComparar
R$224,00 R$320,00

12″ dovetail plate

0 de 5
(0)
SKU: TT-C07

The Tilta 12” Lightweight ARRI Standard Dovetail Plate can be used directly on the OConnor 2060, 2575, and 120ex and Sachtler Cine 30 Fluid Heads.

ComprarComparar
R$247,00 R$353,00

14″ dovetail plate

0 de 5
(0)
SKU: TT-C07-14

The TT-C07-14 from Tilta is a 14″ Dovetail Plate (ARRI Standard) which is made from Aluminum alloy and stainless steel. It is used directly with the O’Connor 2060, 2575, and 120ex. It is also used with the Sachtler Cine 30 fluid heads.

ComprarComparar
R$419,00 R$599,00

15mm baseplate for sony F5/F55+10″plate(new version)

0 de 5
(0)
SKU: BS-T09

The Tilta 15mm Baseplate / Dovetail Plate for Sony F5/F55 from ikan is a 15mm rod support system designed for the Sony CineAlta PMW-F5 and PMW-F55 digital cinema cameras. The combo design features a baseplate with adjustable 15mm rod ports, 5″ and 10″ dovetail plates for better balancing of rigs on tripods, and solid machined aluminum construction. Two sets of 15mm rod pairs come included, in lengths of 7.87″ and 11.8″.

Your Sony F5 or F55 camera mounts to the baseplate via a 1/4″-20 or 3/8″-16 screw. Ports are available for using 15mm rod pairs. Levers on the side of the baseplate allow for adjusting the position of the rods. The baseplate also has two Arri compatible rosettes on each side for connecting dog bones, handles, or other accessories.

For mounting the baseplate onto tripods, two dovetail plates are provided. The dovetail plate is attached to the tripod using the provided 1/4″-20 and 3/8″-16 threads. The baseplate slides onto the dovetail plate, letting you quickly attach and release your entire rig from the tripod.

The 5″ dovetail plate is suitable for smaller rigs, while the 10″ plate allows larger rigs to be centered and balanced. The 10″ dovetail plate locks in via a lever on the side of the baseplate, and the 5″ dovetail plate locks in with a thumb screw. Both dovetail plates have safety stops on both ends.

ComprarComparar
R$315,00 R$450,00

15mm baseplate for sony FS7 camera

0 de 5
(0)
SKU: BS-T10

Specifically designed to work with your FS7 camera, the Tilta BS-T10 Quick Release Baseplate for Sony FS7 allows you to mount your camera on a VCT-type quick-release-style tripod adapter. The baseplate allows you to go from tripod mounted to handheld with just the flick of the release lever on an optional VCT adapter plate. The baseplate features a built-in shoulder pad so the camera maintains its hand holdable function and adds LWS rod support for accessories. ARRI compatible rosettes are built-into each side of the baseplate, allowing you to use optional ARRI compatible handgrips.

Front and rear mounted LWS rod clamps allow you to use the included support rods for optional rod-mounted accessories such as a matte box or a follow focus. You can mount the rods in the rear clamps to support optional batteries, off-board recorders, or counterweights. Note only one pair of rods are included, so to use front and rear mounted accessories you will need to source optional rods.

You can build this baseplate up as a handheld rig, and then quickly go from handheld to tripod mounted, on a tripod with a VCT type adapter, without altering your rig configuration.
The 15mm rods are female threaded at both ends, allowing you to use optional rod extenders and rods to create longer support rods.
One end of each rod is chamfered, which makes it easier to slide rod-mounted accessories onto the support rods from the chamfered end.
ComprarComparar
R$36,00 R$48,00

15mm lens supporter(15mm rod adaptor)

0 de 5
(0)
SKU: LS-T03

Este suporte de lente Tilta 15mm da ikan se grampeia em hastes LWS de 15mm e oferece 3,5 “de ajuste vertical vertical na virada da roda do polegar. Fixa em hastes de um lado quando você aperta outra roda no lateral.

ComprarComparar
R$140,00 R$199,00

15mm lightweight baseplate for RED WEAPON

0 de 5
(0)
SKU: BS-T01

Used on all DSMC2 Tilta Cage bodies, slide and connect dual 15mm rods with this quick release baseplate to the Tilta lightweight dovetail system.

ComprarComparar
R$419,00 R$599,00

15mm LSW baseplate+5″&10″plates

0 de 5
(0)
SKU: BS-T05-01

The Tilta 15mm Lightweight Baseplate / Dovetail Plate is a 15mm rod support system designed for DSLR cameras and small to medium sized camcorders. The combo design features a baseplate with adjustable 15mm rod ports, 5″ and 10″ dovetail plates for better balancing of rigs on tripods, and solid machined aluminum construction. Two sets of 15mm rod pairs come included, in lengths of 7.87″ and 11.8″.

Your camera mounts to the baseplate via a 1/4″-20 or 3/8″-16 screw. Ports are available for using 15mm rod pairs. Levers on the side of the baseplate allow for adjusting the position of the rods. The baseplate also has two Arri compatible rosettes on each side for connecting dog bones, handles, or other accessories.

For mounting the baseplate onto tripods, two dovetail plates are provided. The dovetail plate is attached to the tripod using the provided 1/4″-20 and 3/8″-16 threads. The baseplate slides onto the dovetail plate, letting you quickly attach and release your entire rig from the tripod.

The 5″ dovetail plate is suitable for smaller rigs, while the 10″ plate allows larger rigs to be centered and balanced. The 10″ dovetail plate locks in via a lever on the side of the baseplate, and the 5″ dovetail plate locks in with a thumb screw. Both dovetail plates have safety stops on both ends.

ComprarComparar
R$35,00 R$50,00

15mm rod adaptor (with side rosette)

0 de 5
(0)
SKU: TT-E04

Tilta 15mm Rod Adapter with Side Rosette

ComprarComparar
R$322,00 R$460,00

15mm studio baseplate(ARRI standard)

0 de 5
(0)
SKU: TT-C06-A

Make transitioning your ESR-T06 rig from tripod to mobile as simple as can be with the Tilta TT-C06-A. The TT-C06-A is an ARRI dovetail compatible mounting plate designed specifically for use with Tilta’s advanced ARRI Alexa Mini Rig. Once mounted to the base of the ESR-T06, the TT-C06-A allows an operator to quickly secure, or unsecure, the rig from any compatible ARRI dovetail style baseplate. Additionally, the baseplate accepts two 15mm standard rods, adding even more equipment and accessory mounting points than already available on the ESR-T06. The mounting plate is constructed using the same quality aluminum and build as the ESR-T06. Combining the two creates a seamless package in both function and design. Not intending on buying an Alexa Mini? Not a problem. The TT-C06-A’s top mount has number of 1/4″-20 and 3/8″-16 mounting points, allowing you to securely mount veritably any camera or camcorder imaginable to an ARRI dovetail plate.

ComprarComparar
R$420,00 R$600,00

15mm studio baseplate(ARRI standard)

0 de 5
(0)
SKU: TT-C06-B

TiLTA TT-C06-D Professional Multi-functional BaseplatePackage Contents:1x TiLTA TT-C06-D Professional Multi-functional Baseplate

ComprarComparar
R$270,00 R$360,00

15mm VCT-U14 Quick-release baseplate

0 de 5
(0)
SKU: BS-T03

Easily mount your camera onto a tripod via the Sony VCT-U14 Tripod Adapter using the Tilta 15mm Quick-Release Baseplate. The V-lock system on the underside of the baseplate locks firmly onto the Sony VCT-U14, which can then be mounted onto a tripod’s wedge plate. Alternatively, the baseplate’s quick-release mechanism allows you to easily detach it from the VCT-U14 and switch to a shoulder mount/handheld configuration.

You can make front and back adjustments thanks to the adjustable shoulder pad which is padded to give you comfort while carrying your camera on long shoots. In addition, since the shoulder pad is located at the center of the underside of the baseplate, it allows for optimum balancing for the safety of your camera system.

The baseplate comes with 8” rods to mount accessories like a follow focus or EVF. Additionally, the height-adjustable 15mm rods adapter allows you to adjust the height of the 15mm rods for appropriate placement of accessories.

V-Lock system provides rock-solid connection to tripod with Sony V-Mount VCT-U14 Tripod Adapter
Easily and quickly change between studio and handheld configurations
Adjustable shoulder pad allows front and back adjustments
Padding material provides more comfort and better fit on your shoulder
Centered shoulder pad position helps appropriate balancing of the whole rig
Comes with a height-adjustable 15mm rods adapter
ComprarComparar
R$336,00 R$480,00

18″ dovetail plate

0 de 5
(0)
SKU: TT-C07-18

The Tilta 18” Lightweight ARRI Standard Dovetail Plate can be used directly on the OConnor 2060, 2575, and 120ex and Sachtler Cine 30 Fluid Heads.

ComprarComparar
R$322,00 R$460,00

19mm baseplate(ARRI standard)

0 de 5
(0)
SKU: TT-C06

The TT-C06 19mm Base Plate is designed to mount seamlessly to ARRI standard dovetail style plates, providing a stable means to quickly attach and detach cameras and accessories during rapid shot resets. Built of aircraft grade aluminum, the TT-C06 is ready to handle the heaviest equipment; equipment that lesser quick relase plates just cannot handle. It features a slotted mounting screw point, heavy duty locking lever, and two 19mm rod mounts.

ComprarComparar
R$546,00 R$780,00

19mm baseplate+12″ dovetail plate

0 de 5
(0)
SKU: TT-C06/07
The ikan TT-C06/C07 is a lightweight base plate composed of the Tilta 19mm base plate with the ARRI Standard Dovetail Plate. You can easily attach any camera to this versatile base plate such as heavy-duty cameras like the ALEXA or lightweight cameras like the Sony F5. The base plate comes with and utilizes the threaded 19mm rods to mount on accessories such as a matte box or follow focus. The ARRI standard dovetail mounts directly onto the tripod and works best with heavy-duty tripod heads such as the Sachtler Cine 30 fluid head.
ComprarComparar
R$476,00 R$680,00

24″ dovetail plate

0 de 5
(0)
SKU: TT-C07-24

The Tilta 24” Lightweight ARRI Standard Dovetail Plate can be used directly on the OConnor 2060, 2575, and 120ex and Sachtler Cine 30 Fluid Heads.

ComprarComparar
R$390,00 R$519,00

4*4 carbon fiber matte box

0 de 5
(0)
SKU: MB-T03

The MB-T03 is a lightweight, carbon fiber matte box from Tilta designed for 4×4 cinema filters, like those from NiSi.There is one rotating filter holder for positioning a graduated or polarized filter, and one static tray for standard filters.

This matte box can support lenses with a diameter from 72-100mm. Specifically, the default lens size is 100mm, but there are adapters for 72, 80, and 90mm lenses, and an elastic fabric ring (a nun’s knickers) to eliminate light leakage if your lens doesn’t fit one of the adapters exactly.

The MB-T03 mounts to 15mm rails and can be vertically adjusted to match your lens height. The body can swing away from the camera to allow for easy filter swaps and adjustment, and there are three mounts for the included French flags: a top-mount and two side mounts.

ComprarComparar
R$315,00 R$450,00

4*4 lightweight matte box

0 de 5
(0)
SKU: MB-T05

Durable, rugged, and equipped with professional features, the Tilta 4×4 Lightweight Matte Box is the answer to taking your shooting setup to the next level. Have control over your images like never before, with the ability to block unwanted light spillage from hitting your lens. The two 4×4 filter holders allow you to use industry standard size filters, including polarizing and neutral density filters to further manipulate and perfect your image. For added creativity, you can use unique effect filters with the rotating filter holder—the flexibility is nearly limitless.

The matte box features a swing away design, making lens changes a breeze, and works with virtually any camera system with the included 15mm rod adaptor. Additionally, you get two lens adaptors (80mm, 95mm), “nuns knickers” fabric lens donut, to ensure complete rear coverage of your lens, and a top French Flag to block out excess light spill.

With so much to offer at an accessible price point, The Tilta 4×4 Lightweight Matte box is the perfect addition to your filmmaking arsenal.

ComprarComparar

 9.Solutions Ação Camera L-Bracket

0 de 5
(0)

DESTAQUES DO PRODUTO:

  • Muda o ângulo da câmera em 90°
  • 2,54cm parafuso de montagem
  • Seis buracos de 2,54cm
  • Receiver de montagem rápida
SKU: 9.XA1017

 9.Solutions Cisne de cabeça de montagem rápida

0 de 5
(0)

DESTAQUES DO PRODUTO:

  • Aderência magnética, braço flexível
  • Comprimento: 248,92cm
  • Alinhamento de linha instantânea
  • Manga de silicone à prova de intempéries
  • Conectores de montagem rápida macho e fêmea
SKU: 9.XG1029

10″ lightweight dovetail plate

0 de 5
(0)
ikans TT-C16 is a 10″ lightweight dovetail plate that mounts to your tripod and is made from aluminum alloy and stainless steel. This dovetail plate is compatible with our other Tilta 15mm baseplates such as the BlackMagic Cinema Camera Rig (ES-T07), Canon C300/C500 Rig (ES-T06), or the Sony FS700 Rig (ES-T05).
SKU: TT-C16
R$112,00 R$160,00 ComprarComparar

12″ dovetail plate

0 de 5
(0)

The Tilta 12” Lightweight ARRI Standard Dovetail Plate can be used directly on the OConnor 2060, 2575, and 120ex and Sachtler Cine 30 Fluid Heads.

SKU: TT-C07
R$224,00 R$320,00 ComprarComparar

14″ dovetail plate

0 de 5
(0)

The TT-C07-14 from Tilta is a 14″ Dovetail Plate (ARRI Standard) which is made from Aluminum alloy and stainless steel. It is used directly with the O’Connor 2060, 2575, and 120ex. It is also used with the Sachtler Cine 30 fluid heads.

SKU: TT-C07-14
R$247,00 R$353,00 ComprarComparar

15mm baseplate for sony F5/F55+10″plate(new version)

0 de 5
(0)

The Tilta 15mm Baseplate / Dovetail Plate for Sony F5/F55 from ikan is a 15mm rod support system designed for the Sony CineAlta PMW-F5 and PMW-F55 digital cinema cameras. The combo design features a baseplate with adjustable 15mm rod ports, 5″ and 10″ dovetail plates for better balancing of rigs on tripods, and solid machined aluminum construction. Two sets of 15mm rod pairs come included, in lengths of 7.87″ and 11.8″.

Your Sony F5 or F55 camera mounts to the baseplate via a 1/4″-20 or 3/8″-16 screw. Ports are available for using 15mm rod pairs. Levers on the side of the baseplate allow for adjusting the position of the rods. The baseplate also has two Arri compatible rosettes on each side for connecting dog bones, handles, or other accessories.

For mounting the baseplate onto tripods, two dovetail plates are provided. The dovetail plate is attached to the tripod using the provided 1/4″-20 and 3/8″-16 threads. The baseplate slides onto the dovetail plate, letting you quickly attach and release your entire rig from the tripod.

The 5″ dovetail plate is suitable for smaller rigs, while the 10″ plate allows larger rigs to be centered and balanced. The 10″ dovetail plate locks in via a lever on the side of the baseplate, and the 5″ dovetail plate locks in with a thumb screw. Both dovetail plates have safety stops on both ends.

SKU: BS-T09
R$419,00 R$599,00 ComprarComparar

15mm baseplate for sony FS7 camera

0 de 5
(0)

Specifically designed to work with your FS7 camera, the Tilta BS-T10 Quick Release Baseplate for Sony FS7 allows you to mount your camera on a VCT-type quick-release-style tripod adapter. The baseplate allows you to go from tripod mounted to handheld with just the flick of the release lever on an optional VCT adapter plate. The baseplate features a built-in shoulder pad so the camera maintains its hand holdable function and adds LWS rod support for accessories. ARRI compatible rosettes are built-into each side of the baseplate, allowing you to use optional ARRI compatible handgrips.

Front and rear mounted LWS rod clamps allow you to use the included support rods for optional rod-mounted accessories such as a matte box or a follow focus. You can mount the rods in the rear clamps to support optional batteries, off-board recorders, or counterweights. Note only one pair of rods are included, so to use front and rear mounted accessories you will need to source optional rods.

You can build this baseplate up as a handheld rig, and then quickly go from handheld to tripod mounted, on a tripod with a VCT type adapter, without altering your rig configuration.
The 15mm rods are female threaded at both ends, allowing you to use optional rod extenders and rods to create longer support rods.
One end of each rod is chamfered, which makes it easier to slide rod-mounted accessories onto the support rods from the chamfered end.
SKU: BS-T10
R$315,00 R$450,00 ComprarComparar

15mm lens supporter(15mm rod adaptor)

0 de 5
(0)

Este suporte de lente Tilta 15mm da ikan se grampeia em hastes LWS de 15mm e oferece 3,5 “de ajuste vertical vertical na virada da roda do polegar. Fixa em hastes de um lado quando você aperta outra roda no lateral.

SKU: LS-T03
R$36,00 R$48,00 ComprarComparar

15mm lightweight baseplate for RED WEAPON

0 de 5
(0)

Used on all DSMC2 Tilta Cage bodies, slide and connect dual 15mm rods with this quick release baseplate to the Tilta lightweight dovetail system.

SKU: BS-T01
R$140,00 R$199,00 ComprarComparar

15mm LSW baseplate+5″&10″plates

0 de 5
(0)

The Tilta 15mm Lightweight Baseplate / Dovetail Plate is a 15mm rod support system designed for DSLR cameras and small to medium sized camcorders. The combo design features a baseplate with adjustable 15mm rod ports, 5″ and 10″ dovetail plates for better balancing of rigs on tripods, and solid machined aluminum construction. Two sets of 15mm rod pairs come included, in lengths of 7.87″ and 11.8″.

Your camera mounts to the baseplate via a 1/4″-20 or 3/8″-16 screw. Ports are available for using 15mm rod pairs. Levers on the side of the baseplate allow for adjusting the position of the rods. The baseplate also has two Arri compatible rosettes on each side for connecting dog bones, handles, or other accessories.

For mounting the baseplate onto tripods, two dovetail plates are provided. The dovetail plate is attached to the tripod using the provided 1/4″-20 and 3/8″-16 threads. The baseplate slides onto the dovetail plate, letting you quickly attach and release your entire rig from the tripod.

The 5″ dovetail plate is suitable for smaller rigs, while the 10″ plate allows larger rigs to be centered and balanced. The 10″ dovetail plate locks in via a lever on the side of the baseplate, and the 5″ dovetail plate locks in with a thumb screw. Both dovetail plates have safety stops on both ends.

SKU: BS-T05-01
R$419,00 R$599,00 ComprarComparar

15mm rod adaptor (with side rosette)

0 de 5
(0)

Tilta 15mm Rod Adapter with Side Rosette

SKU: TT-E04
R$35,00 R$50,00 ComprarComparar

15mm studio baseplate(ARRI standard)

0 de 5
(0)

Make transitioning your ESR-T06 rig from tripod to mobile as simple as can be with the Tilta TT-C06-A. The TT-C06-A is an ARRI dovetail compatible mounting plate designed specifically for use with Tilta’s advanced ARRI Alexa Mini Rig. Once mounted to the base of the ESR-T06, the TT-C06-A allows an operator to quickly secure, or unsecure, the rig from any compatible ARRI dovetail style baseplate. Additionally, the baseplate accepts two 15mm standard rods, adding even more equipment and accessory mounting points than already available on the ESR-T06. The mounting plate is constructed using the same quality aluminum and build as the ESR-T06. Combining the two creates a seamless package in both function and design. Not intending on buying an Alexa Mini? Not a problem. The TT-C06-A’s top mount has number of 1/4″-20 and 3/8″-16 mounting points, allowing you to securely mount veritably any camera or camcorder imaginable to an ARRI dovetail plate.

SKU: TT-C06-A
R$322,00 R$460,00 ComprarComparar

15mm studio baseplate(ARRI standard)

0 de 5
(0)

TiLTA TT-C06-D Professional Multi-functional BaseplatePackage Contents:1x TiLTA TT-C06-D Professional Multi-functional Baseplate

SKU: TT-C06-B
R$420,00 R$600,00 ComprarComparar

15mm VCT-U14 Quick-release baseplate

0 de 5
(0)

Easily mount your camera onto a tripod via the Sony VCT-U14 Tripod Adapter using the Tilta 15mm Quick-Release Baseplate. The V-lock system on the underside of the baseplate locks firmly onto the Sony VCT-U14, which can then be mounted onto a tripod’s wedge plate. Alternatively, the baseplate’s quick-release mechanism allows you to easily detach it from the VCT-U14 and switch to a shoulder mount/handheld configuration.

You can make front and back adjustments thanks to the adjustable shoulder pad which is padded to give you comfort while carrying your camera on long shoots. In addition, since the shoulder pad is located at the center of the underside of the baseplate, it allows for optimum balancing for the safety of your camera system.

The baseplate comes with 8” rods to mount accessories like a follow focus or EVF. Additionally, the height-adjustable 15mm rods adapter allows you to adjust the height of the 15mm rods for appropriate placement of accessories.

V-Lock system provides rock-solid connection to tripod with Sony V-Mount VCT-U14 Tripod Adapter
Easily and quickly change between studio and handheld configurations
Adjustable shoulder pad allows front and back adjustments
Padding material provides more comfort and better fit on your shoulder
Centered shoulder pad position helps appropriate balancing of the whole rig
Comes with a height-adjustable 15mm rods adapter
SKU: BS-T03
R$270,00 R$360,00 ComprarComparar

18″ dovetail plate

0 de 5
(0)

The Tilta 18” Lightweight ARRI Standard Dovetail Plate can be used directly on the OConnor 2060, 2575, and 120ex and Sachtler Cine 30 Fluid Heads.

SKU: TT-C07-18
R$336,00 R$480,00 ComprarComparar

19mm baseplate(ARRI standard)

0 de 5
(0)

The TT-C06 19mm Base Plate is designed to mount seamlessly to ARRI standard dovetail style plates, providing a stable means to quickly attach and detach cameras and accessories during rapid shot resets. Built of aircraft grade aluminum, the TT-C06 is ready to handle the heaviest equipment; equipment that lesser quick relase plates just cannot handle. It features a slotted mounting screw point, heavy duty locking lever, and two 19mm rod mounts.

SKU: TT-C06
R$322,00 R$460,00 ComprarComparar

19mm baseplate+12″ dovetail plate

0 de 5
(0)
The ikan TT-C06/C07 is a lightweight base plate composed of the Tilta 19mm base plate with the ARRI Standard Dovetail Plate. You can easily attach any camera to this versatile base plate such as heavy-duty cameras like the ALEXA or lightweight cameras like the Sony F5. The base plate comes with and utilizes the threaded 19mm rods to mount on accessories such as a matte box or follow focus. The ARRI standard dovetail mounts directly onto the tripod and works best with heavy-duty tripod heads such as the Sachtler Cine 30 fluid head.
SKU: TT-C06/07
R$546,00 R$780,00 ComprarComparar

24″ dovetail plate

0 de 5
(0)

The Tilta 24” Lightweight ARRI Standard Dovetail Plate can be used directly on the OConnor 2060, 2575, and 120ex and Sachtler Cine 30 Fluid Heads.

SKU: TT-C07-24
R$476,00 R$680,00 ComprarComparar

4*4 carbon fiber matte box

0 de 5
(0)

The MB-T03 is a lightweight, carbon fiber matte box from Tilta designed for 4×4 cinema filters, like those from NiSi.There is one rotating filter holder for positioning a graduated or polarized filter, and one static tray for standard filters.

This matte box can support lenses with a diameter from 72-100mm. Specifically, the default lens size is 100mm, but there are adapters for 72, 80, and 90mm lenses, and an elastic fabric ring (a nun’s knickers) to eliminate light leakage if your lens doesn’t fit one of the adapters exactly.

The MB-T03 mounts to 15mm rails and can be vertically adjusted to match your lens height. The body can swing away from the camera to allow for easy filter swaps and adjustment, and there are three mounts for the included French flags: a top-mount and two side mounts.

SKU: MB-T03
R$390,00 R$519,00 ComprarComparar

4*4 lightweight matte box

0 de 5
(0)

Durable, rugged, and equipped with professional features, the Tilta 4×4 Lightweight Matte Box is the answer to taking your shooting setup to the next level. Have control over your images like never before, with the ability to block unwanted light spillage from hitting your lens. The two 4×4 filter holders allow you to use industry standard size filters, including polarizing and neutral density filters to further manipulate and perfect your image. For added creativity, you can use unique effect filters with the rotating filter holder—the flexibility is nearly limitless.

The matte box features a swing away design, making lens changes a breeze, and works with virtually any camera system with the included 15mm rod adaptor. Additionally, you get two lens adaptors (80mm, 95mm), “nuns knickers” fabric lens donut, to ensure complete rear coverage of your lens, and a top French Flag to block out excess light spill.

With so much to offer at an accessible price point, The Tilta 4×4 Lightweight Matte box is the perfect addition to your filmmaking arsenal.

SKU: MB-T05
R$315,00 R$450,00 ComprarComparar

 9.Solutions Ação Camera L-Bracket

0 de 5
(0)

DESTAQUES DO PRODUTO:

  • Muda o ângulo da câmera em 90°
  • 2,54cm parafuso de montagem
  • Seis buracos de 2,54cm
  • Receiver de montagem rápida

 9.Solutions Cisne de cabeça de montagem rápida

0 de 5
(0)

DESTAQUES DO PRODUTO:

  • Aderência magnética, braço flexível
  • Comprimento: 248,92cm
  • Alinhamento de linha instantânea
  • Manga de silicone à prova de intempéries
  • Conectores de montagem rápida macho e fêmea

10″ lightweight dovetail plate

0 de 5
(0)
ikans TT-C16 is a 10″ lightweight dovetail plate that mounts to your tripod and is made from aluminum alloy and stainless steel. This dovetail plate is compatible with our other Tilta 15mm baseplates such as the BlackMagic Cinema Camera Rig (ES-T07), Canon C300/C500 Rig (ES-T06), or the Sony FS700 Rig (ES-T05).
R$112,00 R$160,00 ComprarComparar

12″ dovetail plate

0 de 5
(0)

The Tilta 12” Lightweight ARRI Standard Dovetail Plate can be used directly on the OConnor 2060, 2575, and 120ex and Sachtler Cine 30 Fluid Heads.

R$224,00 R$320,00 ComprarComparar

14″ dovetail plate

0 de 5
(0)

The TT-C07-14 from Tilta is a 14″ Dovetail Plate (ARRI Standard) which is made from Aluminum alloy and stainless steel. It is used directly with the O’Connor 2060, 2575, and 120ex. It is also used with the Sachtler Cine 30 fluid heads.

R$247,00 R$353,00 ComprarComparar

15mm baseplate for sony F5/F55+10″plate(new version)

0 de 5
(0)

The Tilta 15mm Baseplate / Dovetail Plate for Sony F5/F55 from ikan is a 15mm rod support system designed for the Sony CineAlta PMW-F5 and PMW-F55 digital cinema cameras. The combo design features a baseplate with adjustable 15mm rod ports, 5″ and 10″ dovetail plates for better balancing of rigs on tripods, and solid machined aluminum construction. Two sets of 15mm rod pairs come included, in lengths of 7.87″ and 11.8″.

Your Sony F5 or F55 camera mounts to the baseplate via a 1/4″-20 or 3/8″-16 screw. Ports are available for using 15mm rod pairs. Levers on the side of the baseplate allow for adjusting the position of the rods. The baseplate also has two Arri compatible rosettes on each side for connecting dog bones, handles, or other accessories.

For mounting the baseplate onto tripods, two dovetail plates are provided. The dovetail plate is attached to the tripod using the provided 1/4″-20 and 3/8″-16 threads. The baseplate slides onto the dovetail plate, letting you quickly attach and release your entire rig from the tripod.

The 5″ dovetail plate is suitable for smaller rigs, while the 10″ plate allows larger rigs to be centered and balanced. The 10″ dovetail plate locks in via a lever on the side of the baseplate, and the 5″ dovetail plate locks in with a thumb screw. Both dovetail plates have safety stops on both ends.

R$419,00 R$599,00 ComprarComparar

15mm baseplate for sony FS7 camera

0 de 5
(0)

Specifically designed to work with your FS7 camera, the Tilta BS-T10 Quick Release Baseplate for Sony FS7 allows you to mount your camera on a VCT-type quick-release-style tripod adapter. The baseplate allows you to go from tripod mounted to handheld with just the flick of the release lever on an optional VCT adapter plate. The baseplate features a built-in shoulder pad so the camera maintains its hand holdable function and adds LWS rod support for accessories. ARRI compatible rosettes are built-into each side of the baseplate, allowing you to use optional ARRI compatible handgrips.

Front and rear mounted LWS rod clamps allow you to use the included support rods for optional rod-mounted accessories such as a matte box or a follow focus. You can mount the rods in the rear clamps to support optional batteries, off-board recorders, or counterweights. Note only one pair of rods are included, so to use front and rear mounted accessories you will need to source optional rods.

You can build this baseplate up as a handheld rig, and then quickly go from handheld to tripod mounted, on a tripod with a VCT type adapter, without altering your rig configuration.
The 15mm rods are female threaded at both ends, allowing you to use optional rod extenders and rods to create longer support rods.
One end of each rod is chamfered, which makes it easier to slide rod-mounted accessories onto the support rods from the chamfered end.
R$315,00 R$450,00 ComprarComparar

15mm lens supporter(15mm rod adaptor)

0 de 5
(0)

Este suporte de lente Tilta 15mm da ikan se grampeia em hastes LWS de 15mm e oferece 3,5 “de ajuste vertical vertical na virada da roda do polegar. Fixa em hastes de um lado quando você aperta outra roda no lateral.

R$36,00 R$48,00 ComprarComparar

15mm lightweight baseplate for RED WEAPON

0 de 5
(0)

Used on all DSMC2 Tilta Cage bodies, slide and connect dual 15mm rods with this quick release baseplate to the Tilta lightweight dovetail system.

R$140,00 R$199,00 ComprarComparar

15mm LSW baseplate+5″&10″plates

0 de 5
(0)

The Tilta 15mm Lightweight Baseplate / Dovetail Plate is a 15mm rod support system designed for DSLR cameras and small to medium sized camcorders. The combo design features a baseplate with adjustable 15mm rod ports, 5″ and 10″ dovetail plates for better balancing of rigs on tripods, and solid machined aluminum construction. Two sets of 15mm rod pairs come included, in lengths of 7.87″ and 11.8″.

Your camera mounts to the baseplate via a 1/4″-20 or 3/8″-16 screw. Ports are available for using 15mm rod pairs. Levers on the side of the baseplate allow for adjusting the position of the rods. The baseplate also has two Arri compatible rosettes on each side for connecting dog bones, handles, or other accessories.

For mounting the baseplate onto tripods, two dovetail plates are provided. The dovetail plate is attached to the tripod using the provided 1/4″-20 and 3/8″-16 threads. The baseplate slides onto the dovetail plate, letting you quickly attach and release your entire rig from the tripod.

The 5″ dovetail plate is suitable for smaller rigs, while the 10″ plate allows larger rigs to be centered and balanced. The 10″ dovetail plate locks in via a lever on the side of the baseplate, and the 5″ dovetail plate locks in with a thumb screw. Both dovetail plates have safety stops on both ends.

R$419,00 R$599,00 ComprarComparar

15mm rod adaptor (with side rosette)

0 de 5
(0)

Tilta 15mm Rod Adapter with Side Rosette

R$35,00 R$50,00 ComprarComparar

15mm studio baseplate(ARRI standard)

0 de 5
(0)

Make transitioning your ESR-T06 rig from tripod to mobile as simple as can be with the Tilta TT-C06-A. The TT-C06-A is an ARRI dovetail compatible mounting plate designed specifically for use with Tilta’s advanced ARRI Alexa Mini Rig. Once mounted to the base of the ESR-T06, the TT-C06-A allows an operator to quickly secure, or unsecure, the rig from any compatible ARRI dovetail style baseplate. Additionally, the baseplate accepts two 15mm standard rods, adding even more equipment and accessory mounting points than already available on the ESR-T06. The mounting plate is constructed using the same quality aluminum and build as the ESR-T06. Combining the two creates a seamless package in both function and design. Not intending on buying an Alexa Mini? Not a problem. The TT-C06-A’s top mount has number of 1/4″-20 and 3/8″-16 mounting points, allowing you to securely mount veritably any camera or camcorder imaginable to an ARRI dovetail plate.

R$322,00 R$460,00 ComprarComparar

15mm studio baseplate(ARRI standard)

0 de 5
(0)

TiLTA TT-C06-D Professional Multi-functional BaseplatePackage Contents:1x TiLTA TT-C06-D Professional Multi-functional Baseplate

R$420,00 R$600,00 ComprarComparar

15mm VCT-U14 Quick-release baseplate

0 de 5
(0)

Easily mount your camera onto a tripod via the Sony VCT-U14 Tripod Adapter using the Tilta 15mm Quick-Release Baseplate. The V-lock system on the underside of the baseplate locks firmly onto the Sony VCT-U14, which can then be mounted onto a tripod’s wedge plate. Alternatively, the baseplate’s quick-release mechanism allows you to easily detach it from the VCT-U14 and switch to a shoulder mount/handheld configuration.

You can make front and back adjustments thanks to the adjustable shoulder pad which is padded to give you comfort while carrying your camera on long shoots. In addition, since the shoulder pad is located at the center of the underside of the baseplate, it allows for optimum balancing for the safety of your camera system.

The baseplate comes with 8” rods to mount accessories like a follow focus or EVF. Additionally, the height-adjustable 15mm rods adapter allows you to adjust the height of the 15mm rods for appropriate placement of accessories.

V-Lock system provides rock-solid connection to tripod with Sony V-Mount VCT-U14 Tripod Adapter
Easily and quickly change between studio and handheld configurations
Adjustable shoulder pad allows front and back adjustments
Padding material provides more comfort and better fit on your shoulder
Centered shoulder pad position helps appropriate balancing of the whole rig
Comes with a height-adjustable 15mm rods adapter
R$270,00 R$360,00 ComprarComparar

18″ dovetail plate

0 de 5
(0)

The Tilta 18” Lightweight ARRI Standard Dovetail Plate can be used directly on the OConnor 2060, 2575, and 120ex and Sachtler Cine 30 Fluid Heads.

R$336,00 R$480,00 ComprarComparar

19mm baseplate(ARRI standard)

0 de 5
(0)

The TT-C06 19mm Base Plate is designed to mount seamlessly to ARRI standard dovetail style plates, providing a stable means to quickly attach and detach cameras and accessories during rapid shot resets. Built of aircraft grade aluminum, the TT-C06 is ready to handle the heaviest equipment; equipment that lesser quick relase plates just cannot handle. It features a slotted mounting screw point, heavy duty locking lever, and two 19mm rod mounts.

R$322,00 R$460,00 ComprarComparar

19mm baseplate+12″ dovetail plate

0 de 5
(0)
The ikan TT-C06/C07 is a lightweight base plate composed of the Tilta 19mm base plate with the ARRI Standard Dovetail Plate. You can easily attach any camera to this versatile base plate such as heavy-duty cameras like the ALEXA or lightweight cameras like the Sony F5. The base plate comes with and utilizes the threaded 19mm rods to mount on accessories such as a matte box or follow focus. The ARRI standard dovetail mounts directly onto the tripod and works best with heavy-duty tripod heads such as the Sachtler Cine 30 fluid head.
R$546,00 R$780,00 ComprarComparar

24″ dovetail plate

0 de 5
(0)

The Tilta 24” Lightweight ARRI Standard Dovetail Plate can be used directly on the OConnor 2060, 2575, and 120ex and Sachtler Cine 30 Fluid Heads.

R$476,00 R$680,00 ComprarComparar

4*4 carbon fiber matte box

0 de 5
(0)

The MB-T03 is a lightweight, carbon fiber matte box from Tilta designed for 4×4 cinema filters, like those from NiSi.There is one rotating filter holder for positioning a graduated or polarized filter, and one static tray for standard filters.

This matte box can support lenses with a diameter from 72-100mm. Specifically, the default lens size is 100mm, but there are adapters for 72, 80, and 90mm lenses, and an elastic fabric ring (a nun’s knickers) to eliminate light leakage if your lens doesn’t fit one of the adapters exactly.

The MB-T03 mounts to 15mm rails and can be vertically adjusted to match your lens height. The body can swing away from the camera to allow for easy filter swaps and adjustment, and there are three mounts for the included French flags: a top-mount and two side mounts.

R$390,00 R$519,00 ComprarComparar

4*4 lightweight matte box

0 de 5
(0)

Durable, rugged, and equipped with professional features, the Tilta 4×4 Lightweight Matte Box is the answer to taking your shooting setup to the next level. Have control over your images like never before, with the ability to block unwanted light spillage from hitting your lens. The two 4×4 filter holders allow you to use industry standard size filters, including polarizing and neutral density filters to further manipulate and perfect your image. For added creativity, you can use unique effect filters with the rotating filter holder—the flexibility is nearly limitless.

The matte box features a swing away design, making lens changes a breeze, and works with virtually any camera system with the included 15mm rod adaptor. Additionally, you get two lens adaptors (80mm, 95mm), “nuns knickers” fabric lens donut, to ensure complete rear coverage of your lens, and a top French Flag to block out excess light spill.

With so much to offer at an accessible price point, The Tilta 4×4 Lightweight Matte box is the perfect addition to your filmmaking arsenal.

R$315,00 R$450,00 ComprarComparar

 9.Solutions Ação Camera L-Bracket

0 de 5
(0)

DESTAQUES DO PRODUTO:

  • Muda o ângulo da câmera em 90°
  • 2,54cm parafuso de montagem
  • Seis buracos de 2,54cm
  • Receiver de montagem rápida

 9.Solutions Cisne de cabeça de montagem rápida

0 de 5
(0)

DESTAQUES DO PRODUTO:

  • Aderência magnética, braço flexível
  • Comprimento: 248,92cm
  • Alinhamento de linha instantânea
  • Manga de silicone à prova de intempéries
  • Conectores de montagem rápida macho e fêmea

10″ lightweight dovetail plate

0 de 5
(0)
ikans TT-C16 is a 10″ lightweight dovetail plate that mounts to your tripod and is made from aluminum alloy and stainless steel. This dovetail plate is compatible with our other Tilta 15mm baseplates such as the BlackMagic Cinema Camera Rig (ES-T07), Canon C300/C500 Rig (ES-T06), or the Sony FS700 Rig (ES-T05).
R$112,00 R$160,00 ComprarComparar

12″ dovetail plate

0 de 5
(0)

The Tilta 12” Lightweight ARRI Standard Dovetail Plate can be used directly on the OConnor 2060, 2575, and 120ex and Sachtler Cine 30 Fluid Heads.

R$224,00 R$320,00 ComprarComparar

14″ dovetail plate

0 de 5
(0)

The TT-C07-14 from Tilta is a 14″ Dovetail Plate (ARRI Standard) which is made from Aluminum alloy and stainless steel. It is used directly with the O’Connor 2060, 2575, and 120ex. It is also used with the Sachtler Cine 30 fluid heads.

R$247,00 R$353,00 ComprarComparar

15mm baseplate for sony F5/F55+10″plate(new version)

0 de 5
(0)

The Tilta 15mm Baseplate / Dovetail Plate for Sony F5/F55 from ikan is a 15mm rod support system designed for the Sony CineAlta PMW-F5 and PMW-F55 digital cinema cameras. The combo design features a baseplate with adjustable 15mm rod ports, 5″ and 10″ dovetail plates for better balancing of rigs on tripods, and solid machined aluminum construction. Two sets of 15mm rod pairs come included, in lengths of 7.87″ and 11.8″.

Your Sony F5 or F55 camera mounts to the baseplate via a 1/4″-20 or 3/8″-16 screw. Ports are available for using 15mm rod pairs. Levers on the side of the baseplate allow for adjusting the position of the rods. The baseplate also has two Arri compatible rosettes on each side for connecting dog bones, handles, or other accessories.

For mounting the baseplate onto tripods, two dovetail plates are provided. The dovetail plate is attached to the tripod using the provided 1/4″-20 and 3/8″-16 threads. The baseplate slides onto the dovetail plate, letting you quickly attach and release your entire rig from the tripod.

The 5″ dovetail plate is suitable for smaller rigs, while the 10″ plate allows larger rigs to be centered and balanced. The 10″ dovetail plate locks in via a lever on the side of the baseplate, and the 5″ dovetail plate locks in with a thumb screw. Both dovetail plates have safety stops on both ends.

R$419,00 R$599,00 ComprarComparar

15mm baseplate for sony FS7 camera

0 de 5
(0)

Specifically designed to work with your FS7 camera, the Tilta BS-T10 Quick Release Baseplate for Sony FS7 allows you to mount your camera on a VCT-type quick-release-style tripod adapter. The baseplate allows you to go from tripod mounted to handheld with just the flick of the release lever on an optional VCT adapter plate. The baseplate features a built-in shoulder pad so the camera maintains its hand holdable function and adds LWS rod support for accessories. ARRI compatible rosettes are built-into each side of the baseplate, allowing you to use optional ARRI compatible handgrips.

Front and rear mounted LWS rod clamps allow you to use the included support rods for optional rod-mounted accessories such as a matte box or a follow focus. You can mount the rods in the rear clamps to support optional batteries, off-board recorders, or counterweights. Note only one pair of rods are included, so to use front and rear mounted accessories you will need to source optional rods.

You can build this baseplate up as a handheld rig, and then quickly go from handheld to tripod mounted, on a tripod with a VCT type adapter, without altering your rig configuration.
The 15mm rods are female threaded at both ends, allowing you to use optional rod extenders and rods to create longer support rods.
One end of each rod is chamfered, which makes it easier to slide rod-mounted accessories onto the support rods from the chamfered end.
R$315,00 R$450,00 ComprarComparar

15mm lens supporter(15mm rod adaptor)

0 de 5
(0)

Este suporte de lente Tilta 15mm da ikan se grampeia em hastes LWS de 15mm e oferece 3,5 “de ajuste vertical vertical na virada da roda do polegar. Fixa em hastes de um lado quando você aperta outra roda no lateral.

R$36,00 R$48,00 ComprarComparar

15mm lightweight baseplate for RED WEAPON

0 de 5
(0)

Used on all DSMC2 Tilta Cage bodies, slide and connect dual 15mm rods with this quick release baseplate to the Tilta lightweight dovetail system.

R$140,00 R$199,00 ComprarComparar

15mm LSW baseplate+5″&10″plates

0 de 5
(0)

The Tilta 15mm Lightweight Baseplate / Dovetail Plate is a 15mm rod support system designed for DSLR cameras and small to medium sized camcorders. The combo design features a baseplate with adjustable 15mm rod ports, 5″ and 10″ dovetail plates for better balancing of rigs on tripods, and solid machined aluminum construction. Two sets of 15mm rod pairs come included, in lengths of 7.87″ and 11.8″.

Your camera mounts to the baseplate via a 1/4″-20 or 3/8″-16 screw. Ports are available for using 15mm rod pairs. Levers on the side of the baseplate allow for adjusting the position of the rods. The baseplate also has two Arri compatible rosettes on each side for connecting dog bones, handles, or other accessories.

For mounting the baseplate onto tripods, two dovetail plates are provided. The dovetail plate is attached to the tripod using the provided 1/4″-20 and 3/8″-16 threads. The baseplate slides onto the dovetail plate, letting you quickly attach and release your entire rig from the tripod.

The 5″ dovetail plate is suitable for smaller rigs, while the 10″ plate allows larger rigs to be centered and balanced. The 10″ dovetail plate locks in via a lever on the side of the baseplate, and the 5″ dovetail plate locks in with a thumb screw. Both dovetail plates have safety stops on both ends.

R$419,00 R$599,00 ComprarComparar

15mm rod adaptor (with side rosette)

0 de 5
(0)

Tilta 15mm Rod Adapter with Side Rosette

R$35,00 R$50,00 ComprarComparar

15mm studio baseplate(ARRI standard)

0 de 5
(0)

Make transitioning your ESR-T06 rig from tripod to mobile as simple as can be with the Tilta TT-C06-A. The TT-C06-A is an ARRI dovetail compatible mounting plate designed specifically for use with Tilta’s advanced ARRI Alexa Mini Rig. Once mounted to the base of the ESR-T06, the TT-C06-A allows an operator to quickly secure, or unsecure, the rig from any compatible ARRI dovetail style baseplate. Additionally, the baseplate accepts two 15mm standard rods, adding even more equipment and accessory mounting points than already available on the ESR-T06. The mounting plate is constructed using the same quality aluminum and build as the ESR-T06. Combining the two creates a seamless package in both function and design. Not intending on buying an Alexa Mini? Not a problem. The TT-C06-A’s top mount has number of 1/4″-20 and 3/8″-16 mounting points, allowing you to securely mount veritably any camera or camcorder imaginable to an ARRI dovetail plate.

R$322,00 R$460,00 ComprarComparar

15mm studio baseplate(ARRI standard)

0 de 5
(0)

TiLTA TT-C06-D Professional Multi-functional BaseplatePackage Contents:1x TiLTA TT-C06-D Professional Multi-functional Baseplate

R$420,00 R$600,00 ComprarComparar

15mm VCT-U14 Quick-release baseplate

0 de 5
(0)

Easily mount your camera onto a tripod via the Sony VCT-U14 Tripod Adapter using the Tilta 15mm Quick-Release Baseplate. The V-lock system on the underside of the baseplate locks firmly onto the Sony VCT-U14, which can then be mounted onto a tripod’s wedge plate. Alternatively, the baseplate’s quick-release mechanism allows you to easily detach it from the VCT-U14 and switch to a shoulder mount/handheld configuration.

You can make front and back adjustments thanks to the adjustable shoulder pad which is padded to give you comfort while carrying your camera on long shoots. In addition, since the shoulder pad is located at the center of the underside of the baseplate, it allows for optimum balancing for the safety of your camera system.

The baseplate comes with 8” rods to mount accessories like a follow focus or EVF. Additionally, the height-adjustable 15mm rods adapter allows you to adjust the height of the 15mm rods for appropriate placement of accessories.

V-Lock system provides rock-solid connection to tripod with Sony V-Mount VCT-U14 Tripod Adapter
Easily and quickly change between studio and handheld configurations
Adjustable shoulder pad allows front and back adjustments
Padding material provides more comfort and better fit on your shoulder
Centered shoulder pad position helps appropriate balancing of the whole rig
Comes with a height-adjustable 15mm rods adapter
R$270,00 R$360,00 ComprarComparar

18″ dovetail plate

0 de 5
(0)

The Tilta 18” Lightweight ARRI Standard Dovetail Plate can be used directly on the OConnor 2060, 2575, and 120ex and Sachtler Cine 30 Fluid Heads.

R$336,00 R$480,00 ComprarComparar

19mm baseplate(ARRI standard)

0 de 5
(0)

The TT-C06 19mm Base Plate is designed to mount seamlessly to ARRI standard dovetail style plates, providing a stable means to quickly attach and detach cameras and accessories during rapid shot resets. Built of aircraft grade aluminum, the TT-C06 is ready to handle the heaviest equipment; equipment that lesser quick relase plates just cannot handle. It features a slotted mounting screw point, heavy duty locking lever, and two 19mm rod mounts.

R$322,00 R$460,00 ComprarComparar

19mm baseplate+12″ dovetail plate

0 de 5
(0)
The ikan TT-C06/C07 is a lightweight base plate composed of the Tilta 19mm base plate with the ARRI Standard Dovetail Plate. You can easily attach any camera to this versatile base plate such as heavy-duty cameras like the ALEXA or lightweight cameras like the Sony F5. The base plate comes with and utilizes the threaded 19mm rods to mount on accessories such as a matte box or follow focus. The ARRI standard dovetail mounts directly onto the tripod and works best with heavy-duty tripod heads such as the Sachtler Cine 30 fluid head.
R$546,00 R$780,00 ComprarComparar

24″ dovetail plate

0 de 5
(0)

The Tilta 24” Lightweight ARRI Standard Dovetail Plate can be used directly on the OConnor 2060, 2575, and 120ex and Sachtler Cine 30 Fluid Heads.

R$476,00 R$680,00 ComprarComparar

4*4 carbon fiber matte box

0 de 5
(0)

The MB-T03 is a lightweight, carbon fiber matte box from Tilta designed for 4×4 cinema filters, like those from NiSi.There is one rotating filter holder for positioning a graduated or polarized filter, and one static tray for standard filters.

This matte box can support lenses with a diameter from 72-100mm. Specifically, the default lens size is 100mm, but there are adapters for 72, 80, and 90mm lenses, and an elastic fabric ring (a nun’s knickers) to eliminate light leakage if your lens doesn’t fit one of the adapters exactly.

The MB-T03 mounts to 15mm rails and can be vertically adjusted to match your lens height. The body can swing away from the camera to allow for easy filter swaps and adjustment, and there are three mounts for the included French flags: a top-mount and two side mounts.

R$390,00 R$519,00 ComprarComparar

4*4 lightweight matte box

0 de 5
(0)

Durable, rugged, and equipped with professional features, the Tilta 4×4 Lightweight Matte Box is the answer to taking your shooting setup to the next level. Have control over your images like never before, with the ability to block unwanted light spillage from hitting your lens. The two 4×4 filter holders allow you to use industry standard size filters, including polarizing and neutral density filters to further manipulate and perfect your image. For added creativity, you can use unique effect filters with the rotating filter holder—the flexibility is nearly limitless.

The matte box features a swing away design, making lens changes a breeze, and works with virtually any camera system with the included 15mm rod adaptor. Additionally, you get two lens adaptors (80mm, 95mm), “nuns knickers” fabric lens donut, to ensure complete rear coverage of your lens, and a top French Flag to block out excess light spill.

With so much to offer at an accessible price point, The Tilta 4×4 Lightweight Matte box is the perfect addition to your filmmaking arsenal.

R$315,00 R$450,00 ComprarComparar

Mostrando 1–20 de 597 resultados